Skip to main content

DAP Frigga Active Column PA System

DAP Frigga Active Column PA System

£1,010.00

Available to ship direct from our supplier – 4-6 days from date of order.


The DAP Frigga is an active PA speaker system with one subwoofer and one column speaker, suitable for singer-songwriters, corporate presenters, mobile DJs, nightlife venues, and bands.

 

Available to ship direct from our supplier – 4-6 days from date of order.

Seen this cheaper somewhere?




    Product Details







    EAN: 8717748576118 SKU: D3880 Categories: , , , Brand:

    Overview

    DAP Frigga Active Column PA System

    The DAP Frigga Active Column PA System is an active PA speaker system with one subwoofer and one column speaker, suitable for singer-songwriters, corporate presenters, mobile DJs, nightlife venues, and bands. It offers three inputs: XLR microphone input with gain and clip indicator, XLR line input with passthrough, and Bluetooth with TWS support. The mixed output combines all signals. The SUB level control and Master level adjust the balance and volume. Status LEDs indicate the amplifier status.
    The Frigga features an active dual 12″ subwoofer with a built-in amplifier for the column speaker. The column speaker includes six 4″ neodymium midrange drivers and a 1.5″ neodymium compression driver. The built-in amplifier delivers 1000 W RMS (2000 W peak) across three channels. Two mounting poles adjust the height for various setups.
    The Frigga comes with cables, mounting poles, and spacers and is available in black or white. Please note that microphone and line signals are not transmitted via Bluetooth when using TWS.

    Features

    • 1000 W RMS, max SPL of 134 dB at 1m (column)
    • 40 – 20,000 Hz frequency range
    • Bi-amp
    • Microphone, line and Bluetooth 5.0 inputs with TWS
    • Cables, mounting poles and spacer included

    Product Specifications

    Outputs
    Power Amplifier RMS Output: 1000 W
    Power Amplifier Peak Output: 2000 W
    Top Cabinet High Driver Power: 250 W
    Top Cabinet Low Driver Power: 250 W
    Subwoofer Power: 500 W
    Passive Output Connector: Speaker Connector 4 pole
    Main Outputs: 1
    Main Output Connector: 3-pin XLR
    Inputs
    Mono Inputs: 2
    Mono Input Connector: 3-pin XLR
    Audio Specifications
    THD Level: < 0.3 %
    Signal-to-noise Ratio: > 105 dB
    AD/DA Convertor Sample Rate: 48 kHz
    Amp Technology: Class D /Class H
    Speaker System: Active Subwoofer/ Active Bi-amp 2-way
    Speaker Sensitivity (1 W/1 m): 96 dB
    Max. SPL Subwoofer at 1 m: 132 dB
    Max. SPL Top Cabinet at 1 m: 134 dB
    DSP Processor Bitrate: 24-bit
    Frequency Response Minimum: 40 Hz
    Frequency Response Maximum: 20000 Hz
    Woofer Diameter: 12 “
    Woofer Voice Coil Diameter: 2.5 “
    Woofer Magnet Type: Ferrite
    Satellite Woofer Diameter: 4 “
    Satellite Woofer Voice Coil Diameter: 1 “
    Satellite Woofer Magnet Type: Neodymium
    Compression Driver Diameter: 1 “
    Compression Driver Voice Coil: 1.8 “
    Compression Driver Magnet Type: Ferrite
    Subwoofer Dispersion Angle (Horizontal): 360 °
    Subwoofer Dispersion Angle (Vertical): 180 °
    Satellite Dispersion Angle (Horizontal): 110 °
    Satellite Dispersion Angle (Vertical): 30 °
    Electrical Specifications and Connections
    Power Supply: 100-240 V AC 50/60 Hz
    Power Consumption: 1100 W
    Power Connector In: Power Pro Blue
    Power Connector Out: Power Pro Grey
    Mechanical Specifications:
    Top Cabinet Height: 765 mm
    Top Cabinet Width: 135 mm
    Top Cabinet Depth: 200 mm
    Subwoofer Height: 865 mm
    Subwoofer Width: 430 mm
    Subwoofer Depth: 485 mm
    Material: Plywood
    Top Cabinet Weight: 8 kg
    Subwoofer Weight: 25 kg
    IP Rating: IP20 (indoor use only)
    Colour: Black
    Thermal Specifications
    Maximum Ambient Temperature: 40 °C
    Minimum Ambient Temperature: -20 °C
    Included Items
    Included Cables: Power Pro Cable, Speaker cable