Included In The Nexo P12+ Package:

2 x Nexo P12+ Loudspeakers
2 x Nexo L15 Sub-Bass Cabinets
1 x Nexo NXAMP4X2 MK2 4 Channel Amplifier / Processor
2 x Gravity M20 Poles
4 core speaker cables are not included in the Nexo P12+ Package, please get in touch and let us know the lengths required for a quote to be supplied.

If you would like to demo any of the Nexo systems we have available, please call us on 01604 638100 to arrange a listening session at our showroom in Northampton.

Nexo P12+

Overview

The Nexo P12+ Mid-Top Speaker can be deployed in vertical or horizontal (wedge monitor) configurations, with HF directivity set to match the specific application. P12 features Active/Passive switching with cabinets available in mobile and installation versions.

Housed in a curvilinear enclosure of custom birch and poplar plywood, the P12 employs a purpose-designed 12 inch LF Neodymium driver and 3 inch diaphragm HF driver in a coaxial configuration. The compact cabinet measures just 531mm x 432mm x 317mm, and can be deployed in vertical or horizontal (wedge monitor) configurations, with HF directivity set to match the specific application. The back plate holds two Speakon connectors (plus one each on both sides) and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.

Features

• Compact, low-profile, curvilinear enclosure
• 12 inch LF Neodymium driver and 3 inch diaphragm HF driver in a coaxial configuration
• Variable HF directivity
• Switchable Active/Passive modes
• 140dB peak SPL (Active Mode)
• Threaded inserts on the back and on both sides for connection of mounting accessories
• Stand fitting on both sides
• 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides

Specifications

• Frequency Response: (+6 dB) 60 Hz – 20 kHz
• Peak SPL Level: (1m) 138dB Peak (Passive mode) / 140dB Peak (Active mode)
• Operating Voltage: 55Vrms (150Vpeak)
• HF Dispersion: (according to horns) 60°x60° – 90°x40° – Asymmetrical Dispersion 60° to 100°x40°
• Crossover Frequency: 60 Hz – 85 Hz
• Nominal Impedance: Active mode (8 Ohms LF, 8 Ohms HF) – Passive mode: 8 Ohms
• Components: LF: 1×12 inch – 8 Ohms; HF : 1×3 inch – 8 Ohm – Neodymium driver
• Material: Baltic birch / Poplar plywood
• Finish: Black or white structural paint, or custion coloured
• Front Finish: Steel front grille + Back mesh
• Fittings: Handle on both sides Threated inserts on the back and on both sides for connection of mounting accessories Stand fitting on both sides (35mm / 1 3/8 inches)
• Connector: 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides
• Weight: 20 kg / 44 lb
• Dimensions (HxWxD): 531mm x 432mm x 317mm (20.9 x 17 x 12.4 inches)

Nexo L15

Overview

The Nexo L15 Sub Bass Cabinet employs a 15 inch long excursion driver in Baltic birch / poplar plywood cabinet with threaded inserts for mounting accessories and an M20 stand fitting. With a frequency range of 40Hz-120Hz, and 139dB Peak SPL, The L15 is specially designed in a footprint to match the P12, making it a perfect partner in flown applications, and for use as a drum fill.

Just like its companion main speaker P12, the L15 has been developed to precisely match the output power of the NXAMP4x2mk2.

Features

• Dedicated partner sub for P12 with matching footprint
• Extends LF performance to 40Hz
• 139dB peak SPL
• 1 x 15 inch long-excusion Neodymium driver
• Can be deployed in standard and cardioid modes
• Threaded inserts on the back and on both sides for connection of mounting accessories
• Standard fitting M20

Specifications

• Frequency Response (+6 dB): 40 Hz – 120 Hz
• Peak SPL Level (1m): 139 dB Peak
• Operating Voltage: 55Vrms (150Vpeak)
• Crossover Frequency: 85 Hz – 120 Hz
• Nominal Impedance: 4 Ohms
• Components: 1x 15 inch – 4 ohms – Long excursion – Neodymium driver
• Material: Baltic birch / Poplar plywood
• Finish: Black or white structural paint
• Front Finish: Steel front grille
• Fittings: Handles on both sides. Threaded inserts on both sides for connection of mounting accessories. Stand fitting M20.
• Connector: 2x NL4, 4 poles connectors
• Weight: 34 kg / 75 lb
• Dimension (HxWxD): 430mm x 650mm x 550mm (16.9 x 25.5 x 21.6 inches)

NXAMP4X4

Overview

Rated at in 4 X 2500 Watts, the NXAMP4X2MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.

Ideal for use in fixed installations and touring, these powered controllers are easy to set up and quick to deploy, with all essential parameters readily accessible via a large colour touch-screen on the front panel and a comprehensive range of control and networking facilities on the rear panel.

Most importantly, the new NXAMPMK2 achieves a whole new level of sound quality, partnering with NEXO speakers to deliver a whole new level of audience experience.

The Nexo NXAMPMK2 ultra-low distortion Class D amplifiers combine 32-bit/96KHz converters and 64-bit signal processing to deliver significant advances in sound quality over the already highly regarded previous generation of NXAMPs. Bass is solid and high-end definition is particularly impressive in a sonic performance that is both articulate and rich with detail. Even at low volumes, the sound is noticeably transparent and pure. The amplifiers integrate three new multi core DSPs providing a future-proofed hardware platform, equipped to host new algorithms and run next-generation firmware updates for years to come.

With a mains voltage range of 100 to 240 Volts it means the amplifiers can be used anywhere in the world and run on all types of power generators. Robust power supplies use PFC (Power Factor Correction) technology to ensure maximum power conversion efficiency and that the current drawn is smoothed and free of spikes to limit the stress on the mains network at all times. A flexible audio input system encompasses four, high end analogue inputs using cascaded converters for low output noise. Four digital inputs are also available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analogue fall-back. A native dual Ethernet card facilitates remote control and daisy-chaining of amplifiers, and seamless integration with Nexo’s NeMo amplifier management software. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Occupying only 2U of rack space, the NXAMP4X2MK2 weighs in at just 16.1kg.

Features

• NEXO and Yamaha collaborate to create the perfect, light weight power and control solution for NEXO loudspeaker systems
• Achieves significant advances in sound quality over previous generation NXAMPs
• 4 x ultra-low distortion Class D amplifiers
• 4 x 2500 Watts
• All essential parameters accessible via a large colour touchscreen on the front panel
• Universal 100 – 240 mains voltage range
• Uses PFC (Power Factor Correction) technology
• Remote control card fitted as standard
• Optional Dante, EtherSound and AES network cards available

Specifications

Power
Number of channels 4 x amplifier channels, 2 by 2 bridgeable
Max output voltage (no load) 4x 140 Volts
Max output power (4 channels mode / 8 Ohms load per channel) 4x 1200 Watts
Max output power (4 channels mode / 4 Ohms load per channel) 4x 1900 Watts
Max output power (4 channels mode / 2 Ohms load per channel) 4x 2500 Watts
Max output power (2 channels mode / 8 Ohms load per channel) 2x 3800 Watts
Max output power (2 channels mode / 4 Ohms load per channel) 2x 5000 Watts
Power consumption (Standby) 10 Watts
Power consumption (Idle) 200 Watts

Input to Power Out
Frequency response +/- 1 dB from 10 Hz to 20 KHz
Input Impedance / Input Sensitivity 20 K Ohms / 16 dBu
Dynamic range / TDH + N 110 dB unweighted / typical 0.01 % on a flat setup
Latency 550 µs on a flat setup
Audio AD and DA converters 32-bits @ 96 KHz
Processing 3x multicore 64-bits processing DSPs