The Nexo P15 & LS18 Hire Package contains:
2 x Nexo P15 PA Speakers
2 x Nexo LS18 Subwoofers
1 x Nexo NXAMP4X4 MK1 4 Channel Amplifier / Processor
2 x Speaker Poles
Cables
P15
The NEXO P15 employs a purpose-designed 15″ LF Neodymium driver and 3″ diaphragm HF driver in a coaxial configuration. The compact cabinet measures just 600mm x 483mm x 352mm, and can be deployed in vertical or horizontal (wedge monitor) configurations, with HF directivity set to match the specific application. The back plate holds two Speakon® connectors (plus one each on both sides) and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.
The NEXO P15 is capable of producing 139 dB Peak (Passive mode) / 141dB Peak SPL (Active Mode).
Recommended Power: Active: (800 to 1350 W LF + 400 to 630 W HF) / Passive: 800 to 1350 W
LS18
High power system (137-140dB peak SPL @ 1m)
Frequency response 30Hz-130Hz (a)
1 x 18″ 4″ voice coil long excursion 8 Ω driver
Light and easy to handle
NXAMP4X4 MK1 4 Channel Amplifier / Processor
| Number of channels | 4x amplifiers channels, 2 by 2 bridgeable |
| Max. output voltage (no load) | 4x 200 Volts |
| Max. output power (4 channels mode /8 Ohms load per channel) | 4x 1900 Watts |
| Max. output power (4 channels mode /4 Ohms load per channel) | 4x 3300 Watts |
| Max. output power (4 channels mode /2 Ohms load per channel) | 4x 4000 Watts |
| Max. output power (2 channels mode /8 Ohms load per channel) | 2x 6800 Watts |
| Max. output power (2 channels mode /4 Ohms load per channel) | 2x 8000 Watts |
| Power consumption (Standby) | 20 Watts |
| Power consumption (Idle) | 120 Watts |
| Frequency response | +0.5 dB from 10 Hz to 20 KHz |
| Input impedance / Max. level | 20 KΩ / +28 dBU |
| Dynamic range / TDH + N | 105 dB unweighted / Typical 0.1% on a flat setup |
| Latency | 500 us on a flat setup |
| A to D Converters | Audio and current/voltage sense lines : 24 bits @ 48 KHz |
| Processing | Two dual-core 24 bits fixed point DSP with 56 bits accumulator |
